Memory Feature; End Of Cooking Reminder - mabe MEI1174ZJSS El Manual Del Propietario

40

memory feature

1. Press the 0/MEMORIA pad to select the desired memory (1 to 3)
procedure. The LED will display 1, 2 or 3.
2. If the cooking procedure has already been set, press the INICIO/
+30 SEG pad to start it. If not, continue to set the cooking proce-
dure. Only one or two stages can be set.
3. After finishing the setting, press INICIO/+30 SEG once to save the
procedure and turn back to the standby state. If the INICIO/+30
SEG pad is pressed again, the oven will start cooking.
Example: To set the following procedure as memory number 2.
Cook the food at 80% microwave power level for 3 minutes and 20
seconds.
1. In the standby state, press the 0/MEMORIA pad twice, the display
will show "2" (that is "Memory number 2").
2. Press the TIEMPO COCINADO pad once, then press "3, 2 and 0" in order.
3. Press the POTENCIA pad once, "PL10" will be displayed. Press "8" to
select POWER LEVEL 8. "PL8" will be displayed.
4. Press INICIO/+30 SEG to save the setting. The buzzer sounds once,
and then the oven turns back to the standby state. If you press
the INICIO/+30 SEG pad again, the procedure will be saved as
Memory 2 and will be executed.
5. If you want to execute the saved procedure, from the standby
state, press the 0/MEMORIA pad twice. The display will show "2".
Then press the INICIO/+30 SEG pad to start.
inquiring feature
• During cooking state, press the RELOJ/TIMER pad. The
display shows the clock for three seconds.
• During microwave cooking, press the POTENCIA pad to inquire micro-
wave power level. The current microwave power level will be dis-
played. After three seconds, the oven will turn back to the previ-
ous state.
• During a multi-stage cooking procedure, the inquiring features
can be used in the same way as above.

end of cooking reminder

When cooking finishes, the buzzer will sound 5 beeps to alert user
the cooking is finished.