GYS FLASH 10.36/48 PL Traducción De Las Instrucciones Originales página 12

Translation of the original instructions
3
Step : Test
Sulfated battery test
4
Step : Desulfation (
Battery desulfation algorithm.
• Lithium charging curve :
The GYSflash 10.36/48 PL uses an advanced 8-step Lithium charging curve that guarantees the optimal performance of your
lithium battery.
1
Step : Analysis
Analyses the state of the battery (charge level, polarity inversion,
wrong battery...)
2
Step : Recovery (
Recovery algorithm following a deep discharge.
3
Step : Charging (
Fast charging at maximum current up to 90%.
of the charge level.
4
Step : Absorption
Constant voltage charging to bring the charge level to 98%.
/
LiFePO4 51.8 V
Li-ion 52.7 V
• Estimated charge time :
Charging current
Battery capacity
Charge timing 0% >90%
12
GYSFLASH 10.36/48 PL
- 47.4 V / - 62 V)
- 2 A / - 2 A)
- 10 A / - 8 A)
/
55.2 V 41.4 V
56.7 V 40.5 V
Lead-acid
8 A
20 Ah 50 Ah 100 Ah 160 Ah
2 h 6 h 12 h 20 h
7
Step : Floating mode (
Maintaining the battery charge level at its maximum.
5
Step : Test
Charge hold test.
6
Step : Complement
Reduce current charge to reach 100% charge level.
7
Step : Equalization / Balancing
Balancing the battery cells
LiFePO4
Li-ion
8
Step : Floating mode
Maintain the battery charge level at its maximum with main-
tenance charge every 10 days.
LiFePO4 51.75 V
Li-ion 52.7 V
10 A
60 Ah 150 Ah 230 Ah 8 Ah
6 h 15 h 23 h 1 h
- 40.8 V /
/ /
54 V 57.6 V 43.2 V
54 V 58.1 V 41.5 V
/ /
55.2 V 41.4 V
56.7 V 40.5 V
Lithium
8 A
30 Ah 120 Ah 160 Ah 30 Ah
3.5 h 15 h 20 h
EN
- 54.4 V)
10 A
140 Ah 230 Ah
3 h 14 h 23 h