Husqvarna 591111501 Manual Del Usuario página 7

Lower Chute
1. Raise the mower deck to its highest cutting
position.
2. Raise and hold the deflector shield in the
upright position.
3. Set the lower chute over the mower opening
and align the holes on the lower chute with
the holes on the mower deck.
4. Insert the bolts (J) through the mower and
chute and fasten with knobs (K).
K
Upper Chute
1. Lower the mower deck to the lowest cutting
position.
2. Insert the upper chute through the opening
in the cover assembly, twisting the chute to
keep the cover gasket in place. Handle the
chute carefully to prevent damage to the full
bag indicator.
ASSEMBLY
J
J
K
3. Move the upper chute onto lower chute,
lining up the notches and channels.
4. Stretch bungee latch up onto acorn nut on
upper chute.
Leveling Mower Deck
Be sure deck is properly leveled for best mower
performance. See the mower's Operator Manual
for instructions.
7 7