Watts EA FC Serie Manual Tecnico página 6

FLANGED CHECK VALVE EA FC
Instructions for replacing the check valve cartridge
Smontaggio
4
Togliere la valvola di ritegno in plastica dalla
sede, sganciandola dal lato posteriore.
The photos, illustrations and descriptions contained in this brochure are solely intended as an indication. Watts Industries reserves
the right to make technical and design changes to its products without prior notice.
Assembly
First place the backside of the plastic check
valve in the recess for this in the housing.
After doing so, press the plastic check valve
in the front opening of the housing.
Remark: It may be recommendable to grease
the o-ring at the front side of the plastic valve
slightly.
A Division of Watts Water Technologies Inc.