8
13
11
10
4
2
1
2
1
5
4
3
6
7
9
12
3 4 5
11
12
12
7
8
6
Scope of supply:
1x tail light cover (1)
1x Topcase adapter (2)
4x bushings 8.5x24.5x4.2 (3)
4x washers DIN 9021 - A 8.4 (4)
4x collar screws M8x25 (5)
2x countersunk screws M8x45 (6)
2x countersunk screws M8x35 (7)
1x Topcase carrier plate(8)
Preparations
- Remove the screws (9) and take off the handles (10).
- Repeat the procedure on the other side.
NOTE:
Carefully set down the license plate holder (11).
- Remove the screws (12) on the left and right and remove the tail light cover
(13).
Assembly
- Mount the tail light cover (1) (included) with the original screws (12) (8 Nm).
- Position the license plate holder (11).
- Mount the bushings 8.5x24.5x4.2 (3) (included) in the license plate
holder (11).
- Position the Topcase adapter (2) (included) on the license plate holder
(11) and mount with the collar screws M8x25 (5) (included) and the wash-
ers 8.4 (4) (included) (18 Nm).
- Position the carrier plate (8) (included) and mount with the countersunk
screws M8x35 (7) (included) and countersunk screw M8x45 (6) (included)
of the grab handles.
Please note that carrying luggage can change the handling characteristics.
Danger of falling off!
Important information for carrying luggage:
Maximum load 5 kg.
Check all connections for tightness of fit after 50 km.
It is recommended to check all connections regularly for tightness of fit.
0021080003
0025080256
0019080456
0019080356
62012010033