Sicce Seachem Tidal 55 Instrucciones De Seguridad Importantes página 16

MAINTENANCE
For Tidal 75 and 110 units, pull up and
back on the top clip of the impeller cover
(4, Figure 11-C). Twist the base of the
impeller counter-clockwise to unlock it
(5), and then pull it free of it's housing (6).
Wash the impeller thoroughly to remove any slime or scales build up. Do not use soap or
detergent. If desired a dilute solution of vinegar and water can be used to breakup any scale
or lime buildup.
After cleaning, replace the impeller insuring that it rotates freely around the shaft and
replace the intake cover of the pump. Reassemble remaining components in the reverse
order. Scale and limestone deposits and the natural wear-out of components might cause
the silent nature of the pump to diminish. However, they do not affect the proper function of
the filter. In such cases it is advisable to replace the impeller to return to the silent operation.
13
Figure 11-C
(Tidal 75 & 110)
4
5
6