Wall Track Installation - OVE KELSEY Manual De Usario

1. Level the tracks (B) and mark the track holes' positions.
2. Remove tracks and drill pilot holes in the marked locations with a ø5/16" (8mm) drill bit.
3. Insert the wall anchors (DD) using a rubber mallet until the wall anchors are flush with the wall.
4. Replace and secure the metal tracks (B) with screws (BB). Do not overtighten.

WALL TRACK INSTALLATION

Helpful Hint
Make sure there
is a support stud
located behind the
drywall, behind the
tracks!
1 1/4"
30mm
Helpful Hint
Do not overtighten!
This may crack the
acrylic or tile walls.
9
1
B
2
ø5/16"
8mm
3
DD
4
BB