Publicidad
Idiomas disponibles
Idiomas disponibles
Assembling the Polisher
-Insert the handle's inner metal tube into the vacuum (Fig.1)
-Push plastic upper handle section onto the handle's outer
metal tube, which will lock into place by way of a metal button
(Fig.2)
Changing the pads and plates on your product
-Make sure appliance is not plugged in before fitting or
removing the pads.
-Invert the cleaning head so that the drive hubs are accessible
(Fig. 3)
-Place the required hook & loop backing plate (for pads) or
brush plate over the hub, making sure the four connectors are
aligned to the holes in the hub (Fig.4).
-Press the plated down to clip into place.
-Always use two plates of the same type, i.e. not 1 brush and 1
pad (Fig.5).
-Simply pull the plates/brushes off to remove and change.
-Adjust the height of the handle
White / blue / yellow pads can be applied directly to the
backing plates and peeled off to remove (Fig.6) For
additional stability the pro-grip handle can be opened to
enable two-handed use. Press the button above the grip
(Fig.7) and open the handle (Fig.8)
Using your polishing head - DO NOT USE ON CARPET
-Take care not to slip over when polishing floors, they can
become very slippery in the process.
-Only use dedicated floor products, other inappropriate
detergents or types of polish could leave the floor dangerously
slippery.
-Do not leave the product operating in one area for a prolonged
period of time as this may damage your floor surface.
Applying floor treatments
-The recommended floor treatment is Ewbank® Floor Polish,
which has been specifically developed to complement the
EPV1100. Ewbank® Floor Polish is available from Ewbank®
retail stockists, from the Ewbank® website www.ewbankus.com
or by calling 855-439-2265.
-Always read and follow the manufacturer's instructions.
-Apply the treatment directly to the floor unless instructions
indicate otherwise.
4
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Publicidad
