Cleaning The Lint Filter; Anti-Freezing Protection - mabe WMT164PEWWW0 Instructivo De Instalación

cleaning the lint filter

1. Press the button head, and pull the lint filter out.
2. Turn the filter net inside out, and rinse it in water.
3. After inserting the claw, press the button to insert it into place.
4. A sound of "ba" means proper installation.

anti-freezing protection

to prevent from freezing:
1. Turn off the water tap, remove the water inlet hose and empty water in
the hose completely.
2. Lay the drain hose and turn the drain selector knob to the "Drain"
position to empty the water in the tub.
if the water is frozen, please take the following steps:
Put the water inlet hose into warm water of about 50°C
1.
Keep about 2 liters of warm water below 50°C in the wash tub for about
2.
10 minutes. and then lay the drain hose and turn the wash drain
selector knob to the "Drain" position to empty the water .
3. Fit the water inlet hose and turn on the water tap to confirm water
filling and draining work properly.
Button head
Claw
below 50ºC
47