Cleaning & Maintenance; Cleaning And Maintenance Instructions - mabe LMA80BYI1 Manual Del Usuario

cleaning & maintenance
end of the wash program
• The washing machine buzzer will signal at the end of any program
in order to remind you to take the load out of the machine.
• After the signal, the washer turns off. The display and all lights
will be off.
• Close the water supply to the appliance. Unplug the power cord
when not in use to prevent water leakage or a fire.
cleaning
After each use, wipe off the water and dirt on the surface of the
washer using a soft cloth. Do not use deter-
gent, solvents or other chemicals as this will re-
sult in damage to plastic parts.
clean the water inlet valve
After a period of use, the water inlet mesh filter could be clogged
with debris, and should be cleaned according to the following steps:
1. Turn on the washer and close the water supply tap.
2. Let the washer run for 5 seconds so water flows into the tub
through the water inlet hose; then turn off the power.
3. Remove the water inlet hose and clean the mesh filter, then re-
place the water inlet hose.
clean the filter (on magic filter models)
Regularly clean the filter according to the following steps:
1. Take out the lint filter.
2. Open the filter and wash it clean in running water.
3. Replace the filter.
43