Broan QP3 Serie Manual Del Usuario página 2

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION
Always turn the hood ON before cooking in order to establish an
air flow in the kitchen. After turning off the range, let the hood run
for a few minutes to clear the air.
Operate the hood as follows:
NOTE
The and
buttons are used to adjust and toggle the menu
and timer settings.
LIGHT (3-Push-button switches 4-light settings)
Turns the light on the low setting and activates a green indicator
above the button. Pressing the button a second time activates
the night time setting and illuminates the indicator.
Turns the light on the medium setting and activates a green
indicator above the button.
Turns the light on the high setting and activates a green indica-
tor above the button.
Pressing and holding the same light button again will turn the lights
off.
When the night time setting is active, pressing and holding the low
light setting button will turn the night time setting off.
FAN (3-Push-button switches 4-fan speeds)
Turns the fan on the low speed and activates a green indicator
above the button.
Turns the fan on the medium speed and activates a green
indicator above the button.
Turns the fan on the high speed and activates a green indica-
tor above the button. Pressing the
vates the boost fan speed and illuminates the
Pressing and holding the same fan button again will turn the fan off.
When the boost speed is active, pressing and holding the high
speed button will turn the boost speed off.
NOTE
This hood utilizes an offset blower design to achieve greater
performance and lower sound levels. As a result, you may notice
that cooking impurities are more attracted to one side or appear
to be pulled-in faster than they appear on the opposite side. This
is completely normal. The hood has been designed and tested
to provide good capture of cooking impurities and odors under
all normal cooking conditions regardless of the cooking location
on the cooktop. Please note that cooking on the rear burners will
always result in the best capture of cooking impurities, regardless
of the hood design.
button a second time acti-
indicator.
10-MINUTE DELAY OFF
When your hood fan is on (any speed) press the
activate the delay off feature. When activated, the hood fan will
automatically turn off after 10-minutes has elapsed. The delay
feature is active when the following appear on the LED screen:
A green indicator illuminated above the delay
meric countdown "10-0" , and a clockwise rotating LED. The delay
button can be pressed once again, to stop the delay countdown.
Pressing the
button again will resume the delay countdown.
Pressing and holding the button will turn off the feature.
TIMER
Press the
button to activate the timer setting feature. Use
the and
buttons to reduce or advance the timer setting to
the desired duration. When the desired timer setting is reached,
allow 3 seconds without pressing any additional button or press
the
button once again. The timer will then activate, and
the countdown will be displayed on the LED screen along with
an green indicator above the
reached "0:00" , an audible beep will be heard. The beep will
continue until the timer button
timer countdown can be stopped at any time by pressing the
once again. Pressing the
the timer countdown. Pressing and holding the
turn off the feature. Note that when both the timer and delay off
features are active together, the timer function will be illuminated
on the LED display, and the delay off countdown will be active,
but not displayed.
FEATURE MENU
Your hood offers many settings that can be accessed and ad-
justed by scrolling through the feature menu. Your hood fan
must be off to be able to activate and access the feature menu.
Pressing the
button when the hood fan is off will activate the
feature menu. Pressing the
menu is active will scroll through the various features that can
be adjusted/set. When the feature menu is active, if a button is
not pressed within 10 seconds or after scrolling through all menu
settings, the feature menu will automatically be exited, and all
selected settings will be saved. A green indicator above the
icon will illuminate when the feature menu is active. The follow-
ing features can be adjusted sequentially:
QP3 SERIES
Page 2
button to
button, a nu-
button. After the timer has
is pressed once again. The
button again will resume
button will
button again when the feature

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Evolution 3Evolution 3 qp serie

Tabla de contenido