Rowenta City Space Manual Del Usuario página 14

• Close the textile bag : make sure that the zipper is completely closed -fig. 16g- before placing it back inside
the appliance.
• Place a new textile bag in the bag support, then place the base inside the compartment by sliding it on
the runners (16) –fig. 16h.
• Make sure the textile bag and the bag support (15) are correctly positioned before closing the lid (8).
CHANGING THE MICROFILTER* (REF. ZR0039 01)
Important: Change the microfilter* every 6 months.
The microfilter* is available at your local retail store or at one of our Authorized Service Centres.
• Open the lid (8) of your vacuum cleaner - fig.14 - and remove the bag.
• Remove the motor protection grid* (12) – fig. 17a.
• Remove the microfilter* (13) – fig. 17b – and keep the motor protection grid* (12).
•Throw the microfilter* (13) in the rubbish bin -fig.17c.
• Place the new microfilter (13) on the motor protection grid* (12) – fig. 17d.
• Slide the ledges into the slots – fig. 17d.
• Screw on the motor protection grid* (12) – fig. 17e.
• Make sure that the motor protection grid* is correctly positioned (12) before closing the lid (8).
The air we breathe contains particles that can be allergenic: larva and dust mite faeces, mould, pollen,
smoke and animal waste (hair, skin, saliva, urine). The finest particles can penetrate deep inside the
respiratory system or cause inflammation, affecting the entire respiratory function.
(H)EPA ([High] Efficiency Air Particle Filter) filters, retain even the smallest particles. Thanks to the (H)EPA
filter, the air released into the room is cleaner than the air vacuumed.
CHANGING THE HEPA* FILTER CASSETTE (REF : ZR0045 01) SUITABLE TO PAPER BAGS
Important: Replace the HEPA filter cassette* ZR0045 01 every 6 months (according to use frequency).
The (H)EPA filter cassette* ref. ZR 0045 01* is available at your local retail store or at one of our Authorized
Service Centres.
• Open the lid (8) of your vacuum cleaner - fig.14 - and remove the bag – fig. 15a.
• Remove the HEPA filter cassette* (14a) – fig. 18a -18b.
•Throw the cassette in the rubbish bin -fig.18c.
• Slide the ledges of the new HEPA filter cassette* into the slots –fig. 18d.
• Screw on the new HEPA filter cassette* (14a) (ref. ZR0045 01) in its compartment – fig. 18e.
• Make sure that the HEPA filter cassette* (14a) is correctly positioned before closing the lid (8).
CLEANING THE HEPA FILTER CASSETTE* (REF : ZR0042 01), SUITABLE FOR TEXTILE BAGS*
Attention!This cleaning procedure is exclusively reserved to the HEPA filter cassette* ref: ZR0042 01.
Important: Clean the HEPA filter cassette ZR0042 01 every 6 months (according to frequency of use).
The (H)EPA filter cassette* ref. ZR0042 01* is available at your local retail store or at one of our Authorized
Service Centres.
• Open the lid (8) of your vacuum cleaner - fig.14, then remove the bag – fig. 16a.
• Remove the HEPA filter cassette* (14b) – fig. 19a-19b.
•Tap the HEPA filter cassette* (14b) over a dustbin - fig. 19c.
• Rinse under running water – fig. 19d and let dry for at least 24 hours – fig. 19e.
• Make sure that the HEPA filter cassette* (14b) is perfectly dry before reinserting it.
• Slide the ledges into the slots - fig. 19f.
• Screw on the HEPA filter cassette* (14b) (Ref: ZR0042 01) in its compartment – fig. 19g.
• Make sure that the HEPA filter cassette* (14b) is well placed before closing the lid (8).
* According to model :These parts are specific to certain models
10
or they are accessories that can be purchased separately.