Sauder 416955 Manual De Instrucciones página 18

Step 14
1
D83
S
Groove
Insert the DRAWER SIDES (D83 and D84) at
å
an angle into the slot at each end of the RIGHT
DRAWER FRONT (S).
3
Fasten the DRAWER BACK (D75) to the DRAWER SIDES (D83 and D84). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S).
å
NOTE: Be sure the DRAWER BOTTOM (D721) inserts into the groove of the DRAWER BACK (D75).
å
Repeat this step for the remaining drawer using the LEFT DRAWER FRONT (R).
å
Page 18
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D84
D75
D83
D721
VIEW THE T-LOCK BOX VIDEO
2
D83
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D721) into the grooves
å
in the DRAWER SIDES (D83 and D84) and RIGHT
DRAWER FRONT (S).
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D84
416955
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
U n
fi n
s u i s h
r f a
e d
c e
D721
D84
S
30S
(8 used in this step)
www.sauder.com/services