Sauder 416955 Manual De Instrucciones página 21

Step 17
Carefully stand your unit upright.
å
To insert the drawers into your unit, tip the front of the
å
drawers down and drop the rollers on the drawers behind the
rollers on the unit. Lift the front of the drawers up and slide
them into the unit.
Apply the WARNING LABEL (2L) to the TOP (E). You should
å
be able to read the label when the TV is removed from the
unit. When the TV is in place, it should hide the label. Peel off
the backing and apply the label as shown in the diagram.
NOTE: This is a permanent label intended to last for the life
å
of the product. Once applied, do not try to remove it.
Center a SCREW COVER (20P) over the head of each visible
å
SCREW and press fi rmly.
Push a CAM COVER (12P) onto each visible HIDDEN CAM.
å
To help prevent the TV from sliding, place the ANTI-SKID
å
PAD (3M) under the front support of the TV or divide among
the front supports if more than one.
3M
20P
(8 used)
To cover screws
www.sauder.com/services
25 lbs.
50 lbs. total
10 lbs.
R
2L
E
70 lbs.
25 lbs.
10 lbs.
S
416955
Pro Tip: Lift with your
legs. And, you know,
your arms.
WARNING
Never use this furniture with a TV that is too
large or too heavy. Severe injury or death can
occur. The TV and furniture will be unstable
and may tip.
- The TV must weigh less than 70 lbs.
- The base of the TV must be able to sit
completely on this shelf.
(11 used)
To cover HIDDEN CAMS
12P
Page 21