Sauder 418653 Manual De Instrucciones página 37

Step 31 Step
Insert a SLIDE CAM (10A) into each DRAWER SIDE (D24 and D25).
å
Fasten a DRAWER RIGHT (35DC) and DRAWER LEFT (35DD) to
å
the DRAWER SIDES (D24 and D25). Use four GOLD 5/16" FLAT
HEAD SCREWS (3S).
NOTE: The screw head in the CAM must be visible through the
å
slotted hole in the SLIDE.
Repeat this step for the other drawers.
å
www.sauder.com/services
Roller end
10A
D25
GOLD 5/16" FLAT HEAD SCREW
(12 used in this step)
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
D24
3S
418653
10A
Roller end
Page 37