System Connection - Campbell Hausfeld PW1580 Instrucciones De Montaje Y Lista De Piezas

Assembly Instructions and Parts List

System Connection

1. Insert lance into the gun and turn
clockwise to positive stop as shown in
Figure 4.
Figure 4 - Gun/Lance Connection
2. Ensure that the power switch is in the
"OFF" position.
3. Attach the high pressure hose and
gun assembly to the unit.
13 mm
Garden
Hose
Figure 5
On/Off
Switch
OUTLET
Detergent
Bottle
3
4. Connect garden hose as explained
under Garden Hose Connection
Instructions.
5. Plug the power cord into a grounded
120V outlet, that is on a dedicated
circuit.
6. Turn water on.
7. Depress and hold the trigger on the
gun for one minute to release pres-
sure and remove any air trapped in
the system.
8. Turn the "ON/OFF" switch to the
"ON" position.
NOTE: REFER TO PRODUCT MANUAL
FOR OPERATING INSTRUCTIONS
Gun
PW1580
High
INLET
Pressure
Hose
www.chpower.com