Tabla de contenido
Publicidad
Assembly Instructions and Parts List
System Connection
1. Insert lance into the gun and turn
clockwise to positive stop as shown in
Figure 4.
Figure 4 - Gun/Lance Connection
2. Ensure that the power switch is in the
"OFF" position.
3. Attach the high pressure hose and
gun assembly to the unit.
GFCI Plug
13 mm
Figure 5
4. Connect garden hose as explained
under Garden Hose Connection
Instructions.
5. Plug the power cord into a grounded
120V outlet.
6. Turn water on.
7. Depress and hold the trigger on the
gun for one minute to release pres-
sure and remove any air trapped in
the system.
8. Turn the "ON/OFF" switch to the
"ON" position.
NOTE: REFER TO PRODUCT MANUAL
FOR OPERATING INSTRUCTIONS
Power
Switch
Inlet (See Garden
Hose Connection
page 1)
3
PW1345B
Gun
High
Pressure
Hose
Outlet
www.chpower.com
Publicidad
Tabla de contenido
