Removing Discs From The Player; Using With Headphones; Advanced Setup; Making Optional Connections - Dynex DX-PDVD7 Guia Del Usuario

Advanced setup

Removing discs from the player

To remove a disc from the player:
1 Press the OPEN button to open the disc tray, then remove the disc.
2 Press the OPEN button to close the disc tray, then turn off the player.

Using with headphones

You can also use the player with headphones (optional) by plugging the headphones into the
headphone jack on the left side of the player. Plugging headphones into the headphone jack
disables the internal speakers.
Warning: To avoid damaging your hearing, set the volume to a low level before putting on
Advanced setup

Making optional connections

Connecting to a TV or another monitor
To connect to a TV or another monitor:
• Connect black mini-plug to the AV OUT jack on the DVD player.
• Connect the yellow plug to the VIDEO IN jack on the TV.
• Connect the red plug to the AUDIO IN R jack on the TV.
• Connect white plug to the AUDIO IN L jack on the TV.
Connecting to TV and amplifier
To connect to a TV and amplifier:
• Connect black mini-plug to the AV OUT jack on the DVD player.
• Connect the yellow plug to the VIDEO IN jack on the TV.
• Connect the red plug to the AUDIO IN R jack on the amplifier.
• Connect white plug to the AUDIO IN L jack on the amplifier.
the headphones, then adjust the volume up to a comfortable level.
AV OUT
DC 9V CHG
VOL.
Video - Yellow
Audio (L) - White
Audio (R) - Red
OFF ON
11