Cleaning And Maintenance - Philips HQ6730 Manual Del Usuario

EnglisH
10
2 2
1 1
5 Clean the shaver (see chapter 'Cleaning and
maintenance').
Rinse the shaver after each shave. Remove the
cartridge if you are not going to use the appliance
for more than one week.
6 Put the protection cap on the shaver every
time you have used it, to prevent damage.
Trimming (HQ6730 and HQ6725 only)
For grooming sideburns and moustache.
1 Switch the shaver off.
Clean the shaver before you attach the trimmer (see
chapter 'Cleaning and maintenance').
2 Press the release button (1) and pull the
shaving unit off the shaver (2).
3 Tilt the trimmer slightly backwards and fit it
onto the shaver.
4 Remove the trimmer by pressing the release
button again and pulling the trimmer off the
shaver.
5 Put the shaving unit back onto the shaver.

cleaning and maintenance

Regular cleaning guarantees better shaving
performance.
To maintain optimal shaving performance and to
keep the shaver clean, you have to thoroughly rinse
the shaving unit and hair chamber with hot water
after every shave.
Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.