Service Maintenance - Waterpik WF-06 Manual Del Usuario

9
General Cleaning/Removing Hard Water Deposits
Hard water deposits may build up in your unit, depending on
the mineral content of your water. If left unattended, it can
hinder performance. Cleaning internal parts: add 2 tablespoons
of white vinegar to a full reservoir of warm water. Point the
handle and tip into sink. Turn unit ON and run until reservoir is
empty. Rinse by repeating with a full reservoir of clean warm
water.
This process should be done every 1 to 3 months to ensure
optimal performance. If using mouthwash or other solutions,
more frequent cleaning is recommended.
Leakage
If leaking due to a damaged hose, replacement hoses and
handles can be purchased at www.waterpik.com or contact
Water Pik Inc. customer service for a self service repair kit.

Service Maintenance

Waterpik® Water Flossers have no consumer serviceable
electrical items and do not require routine service maintenance.
For all accessories go to www.waterpik.com. You may also call
our toll-free customer service number at 1-800-525-2774.
Refer to the serial and model numbers in all correspondence.
These numbers are located on the bottom of your unit.
Still have questions? Go to www.waterpik.com.