End Outlet And Continuous Waste; Adjust Temperature With Water Running - Bradley FL-2H Manual Del Usuario

Installation
6

End Outlet and Continuous Waste

FL-2L shown
FL-2H is opposite
7

Adjust Temperature with Water Running

This valve is NOT factory preset. Upon installation, the temperature of this
valve must be checked and adjusted to ensure delivery of a safe water
temperature. Water in excess of 110°F (43°C) may cause scalding.
Bradley Corporation • 215-1512 Rev. G; ECM 11-08-011
Loosen Cap Screw about 1/4" (4-6
A
turns) and lift up cover (do not
remove).
Using cover, turn cartridge gently until
B
desired water temperature is reached.
Do not turn past stops as this may
damage unit. Push cover down and
tighten screw.
TOP VIEW
FRONT VIEW
25" (508mm) REF.
H
2/15/2012
FL-2H, FL-2L
C
11