GE ASH18 Manual Del Propietario E Instrucciones De Instalación página 12

Window Installation Instructions.
4
Remove the Air Conditioner From the Case
Remove the 2 screws on each side of the case.
A
Keep these for later use.
Front of air conditioner.
5
Prepare the Case
Remove the backing from the top mounting
A
rail seal strip and attach it to the bottom of the
top mounting rail.
6
Prepare the Window
Cut the window sash seal to the window width
A
and stick the adhesive side to the bottom of
the sash.
12
Slide the air conditioner from the case by
B
gripping the base pan handle and pulling
forward while bracing the case.
Front of air conditioner.
Remove packing cardboard and tape if present.
Install the top mounting rail with 6 type A
B
screws from the outside of the case.
Top mounting rail
Insert the frames for the accordion panels into
C
the top and bottom mounting rails. Attach the
accordion panels to the side of the case using
8 type A screws.
Bottom mounting rail
Window sash seal