OPERATION
BATTERY
W A R N I N G
Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to
inflict serious injury.
INSTALLING THE BATTERY PACK
• Insert battery pack into tool until an audible click is heard.
REMOVING THE BATTERY PACK
• Depress the battery release button in the back of the battery pack and pull battery pack out of tool.
W A R N I N G
Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or
accessories not recommended can result in serious personal injury.
W A R N I N G
Follow these instructions in order to avoid injury and to reduce the risk of electric shock or fire: 1. Replace the battery or
the charger immediately if the battery case or charger cord is damaged. 2. Read, understand, and follow the instructions
contained in the charger manual.
STARTING AND STOPPING THE POLE SAW
To start:
• Press the on/off button.
• Depress the lock-out button and squeeze the switch trigger.
• Press high speed button to increase speed depending upon grass condition. Two LED's will illuminate above the high
speed button indicating that the pole saw is in the high speed setting.
To stop:
• Release the switch trigger.
• Press the on/off button again to turn the unit off.
Note: The unit will power itself down after being idle for 1 minute.
See figure 6
See figure 6
Battery release button
See figure 7
11
Figure 6