Snapper XD 1696864 El Manual Del Propietario página 15

BATTERY & CHARGER
CHARGER MOUNTING
1. This charger can be installed hanging on a wall using two #8 screws (not included).
2. Locate the placement for the charger to be wall mounted.
3. If fastening to wood studs use 2 wood screws (not included).
4. Drill two holes on center 4.5 in. apart ensuring that they are vertically aligned.
5. If fastening to drywall use wall anchors (not included) and screws to secure the charger to the wall.
6. This power unit is intended to be correctly orientated in a vertical or floor mount posit
ion.
NOTE: If the battery and the charger won't be used for a long time, remove the battery from the charger and pull out the AC
power plug.
15