Wireless Network Safety Instructions; Ink Cartridge Safety Instructions - Epson XP-431 Instrucciones De Seguridad Importantes

Wireless Network Safety Instructions

To avoid adversely affecting the operation of the following equipment and causing an accident, do
not use the product: near medical equipment in a medical facility; within 8.7 inches (22 cm) of a
cardiac pacemaker; near automatically controlled devices, such as automatic doors or fire alarms.
Radio waves from this product may adversely affect these devices.

Ink Cartridge Safety Instructions

■
Keep ink cartridges out of the reach of children.
■
Be careful when you handle used ink cartridges; there may be ink remaining around the ink
supply port. If ink gets on your skin, wash it thoroughly with soap and water. If it gets in your
eyes, flush them immediately with water. If ink gets in your mouth and see a doctor right away.
■
Do not put your hand inside the product or touch any cartridges during printing.
■
Install a new ink cartridge immediately after removing an expended one. Leaving cartridges
uninstalled can dry out the print head and may prevent the product from printing.
■
Remove the yellow tape from the cartridge before installing it; otherwise, print quality may
decline or you may not be able to print.
■
Do not remove or tear the label on the cartridge; this can cause leakage. Do not remove the
transparent seal from the bottom of the cartridge; otherwise, the cartridge may become
unusable.
■
Do not touch the green IC chip or the small window on the side of the cartridge. This may
prevent normal operation.
■
Do not shake ink cartridges too vigorously or after opening their packages; this can cause them
to leak.
■
If you remove an ink cartridge temporarily, protect the ink supply area from dirt and dust
and store it in the same environment as the product. Note that there is a valve in the ink
supply port, making covers or plugs unnecessary, but care is needed to prevent the ink from
staining items that the cartridge touches. Do not touch the ink cartridge ink supply port or
surrounding area.
■
For maximum efficiency, only remove an ink cartridge when you are ready to replace it. Ink
cartridges with low ink status may not be used when reinserted.
■
All ink cartridges must be installed in order to print.
■
Do not replace ink cartridges with the power off.
■
After installing the ink cartridge, the
charging ink. Do not turn off the printer during ink charging. If the ink charging is incomplete,
you may not be able to print.
■
Use an ink cartridge before the date printed on its package.
■
Do not disassemble or remodel an ink cartridge; otherwise, you may not be able to print
normally.
■
Store ink cartridges in a cool, dark place.
12
Important Safety Instructions
P power light continues to flash while the printer is