Aquacal 5213 Manual De Instalación Y Operación página 11

14193_english_spanish guts 1/29/02 10:40 AM Page 9
RIVIERA/BIG BOPPER/SUNTECH/SEA BLUE CONTROL PANELS
STANDARD
1) POWER LIGHT - Indicates power is connected to the unit.
2) FLOW LIGHT - Indicates pressure (Flow) is present in the unit.
3) DEFROST LIGHT - Indicates unit is in the defrost mode.
4) LOW REFRIGERANT PRESSURE - Indicates low refrigerant pressure in the system.
5) HIGH REFRIGERANT PRESSURE - Indicates high refrigerant in the system. Heater may not have adequate water flow to support
normal operation.
6) ON/OFF TOGGLE SWITCH - ( ) Indicates ON position (0) Indicates OFF position.
7) POOL TEMPERATURE CONTROL - Set this control knob for desired pool temperature.
8) SPA TEMPERATURE CONTROL - Set this control knob for desired spa temperature.
9) POOL/SPA SELECTOR SWITCH - Toggles between the pool (low) temperature setting and the spa (high) temperature setting.
10) HEAT/COOL SELECTOR SWITCH - Toggles between the HEATING and the COOLING mode.
11) POOL FLOW LIGHT - Indicates pressure (POOL WATER FLOW) is present in the unit.
12) SPA FLOW LIGHT - Indicates pressure (SPA WATER FLOW) is present in the unit.
13) POOL OFF/SPA OFF SELECTOR SWITCH - Toggles between pool (low) temperature setting (to the left), OFF position (straight up ­
heat pump is not operating), and spa (high) temperture setting (to the right).
ATV/DX
OPTION
TROPICAL (B) SERIES
CHALLENGER/RIVIERA/SUNTECH
SEABLUE/BABY BOPPER CONTROL PANELS
STANDARD
Page 9
HEAT & COOL
OPTION
A000193D