Aquacal 5213 Manual De Instalación Y Operación página 22

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

14193_english_spanish guts 1/25/02 8:44 AM Page 20
Make sure all isolation valves
are in the correct position
allowing water to flow through
the unit. Be sure filters and
pump skimmer baskets are
clear. Check to be sure the
water level in the pool is not
below the skimmer.
Be sure the evaporator is
clean and free of air restricting
obstructions.
Problem solved
Heater Short Cycling
Is the heater turning
Yes
Yes
operating correctly?
Yes
operating correctly?
Yes
Unit operating correctly?
Yes
Is the fan operating?
Yes
Unit operating correctly?
on and off every 5
minutes?
Is the flow light on
and the heater
Inspect water pressure switch for
Is the flow light on
and the heater
Confirm that water is flowing
through the 1/4 lb. check valve of
the water manifold and through
No
Inspect the fan motor/capacitor as
assistance at 800-786-7751.
Page 20
No
normal operation (adjust
sensitivity if necessary) *
No
the heat exchanger. *
No
needed *
* Should be performed by a
qualified technician
No
Call Aqua Cal for technical

Publicidad

Tabla de contenido
loading

Tabla de contenido