Festo MH1-PCB Manual Del Usuario página 23

6 Mounting the valve
Note
Observe the following with regard to equipment of the
manifold blocks:
• Use only uniform valve functions. Valves with the
function "normally closed" must not be combined
with "normally open" valves.
• If possible, use only valves of the same
voltage type.
• Manifold blocks of type MHP...:
Mount only semi in-line valves.
• Use the following cover plate for sealing an unas-
signed valve position:
– type MHA1-BP3-PI.
• Additionally protect the electrical connections
against contamination with the adhesive foil that
accompanies the cover plate.
Festo MH1...-PCB-Z6 1205b English 23