Black+Decker HSVJ415JMP Manual De Instrucciones página 7

Inalámbrico aspiradora de escoba 2 en 1
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Figure L
The rotary brush
 25 
pieces are removable, allowing you to clear the brushes
from any hair or other debris that has accumulated
during use (Figure M).
Figure M
25
Dry pick up
For everyday spills of dry material.
Do not fill the dust bowl
intake chute.
Optimizing the suction force
In order to keep the suction force optimised, the filters must
be cleared regularly during use.
EMPTYING AND CLEANING THE PRODUCT
Removing the dust bowl and filters -
Figures N & O

WARNING: The filters are reusable and should be
cleaned regularly.
Press the dust bowl release button
insert of Figure N, then pull the dust bowl
as shown in Figure N.
Figure N
While holding the dust bowl over a bin or sink, pull out
the filter
to empty the contents as shown in Figure O.
 26 
can now be removed. The end
 8 
beyond the end of the
as shown in the
 9 
straight off
 8 
Figure O
24
To replace the dust bowl, push it back onto the
appliance until it clicks firmly into place.

WARNING: Never use the appliance without the filters.
Optimum dust collection will only be achieved with
clean filters.
Cleaning the Dust Bowl and Filter
The dust bowl and filter can be washed in warm soapy
water.
Make sure the filter and the dust bowl are dry before
refitting.
For a more thorough cleaning
Remove the dust bowl and filter assembly as described
above.
To separate the plastic filter
twist the plastic filter in a counterclockwise direction
and lift it off of the cloth filter as shown in Figure P.
Shake or lightly brush any loose dust off both filters.
Figure P
The dust bowls and filters can be washed in warm soapy
water. Allow to dry before placing back into the vac.
To replace the filters, slide the outer plastic filter over the
cloth filter.
Align the wings of the plastic filter with the slots in the
cloth filter and twist in a clockwise direction.
Place filters back into the bowl pressing firmly to ensure
a secure fit.
To replace dust bowl, place it back onto the handle until
it "clicks" firmly into position.
iMPOrTanT: Maximum dust collection will only be
obtained with a clean filter and an empty dust bowl. If dust
begins to fall back out of the product after it is switched off,
this indicates that the bowl is full and requires emptying.
English
12
26
 27 
from the cloth filter
 28 
28
27
,
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hsvj520jmp

Tabla de contenido