Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Tips for the perfect shave
•
It can take 14–21 days for your beard to adjust to the new
shaving system.
•
Shave before washing your face or taking a shower, as
skin tends to swell after washing.
•
The drier the skin, the closer the shave will be.
•
Hold the shaver at right angles (90°) to the skin (b).
Stretch the skin and shave against the direction of beard
growth.
•
To maintain 100% shaving performance, replace your foil
and cutter block at least every 18 months or when worn.
Using the styler
•
The wide shaper (4a) evenly cuts and trims larger areas
(c): Ideal for shaping sideburns, moustaches and partial
short beards. Press the blue rib to push out the styler (4).
•
The narrow shaper (4b) precisely defines lines and
edges (d): Ideal for precise contouring. To use the
narrow shaper, push out the styler and turn it 180°.
•
Frequent use of the styler may reduce the battery
capacity.
Using the trimming attachment
•
The trimming attachment (7) is ideal for beard trimming
and keeping it at a constant length.
•
Place the trimming attachment onto the shaver foil (2)
and press it against the shaver housing until it snaps into
place with a click.
•
Press the beard length setting (8) (e) and slide it up in
order to set the desired beard length (length settings
from top to bottom):
0.04 in / 1.2 mm
0.11 in / 2.8 mm
0.17 in / 4.4 mm
0.23 in / 6 mm
Push out the styler (4).
•
Activate the on/off switch and trim against the direction
of hair growth by guiding the blue transparent comb part
over the skin.
•
After use, pull back the styler. Remove the trimming
attachment (a).
Cleaning
The hand-held unit shall be detached from the power supply
cord before cleaning. The shaver shall not be used until it
has dried.
Regular cleaning ensures better shaving performance.
Rinsing the shaving head after each shave under running
water is an easy and fast way to keep it clean:
•
Switch the shaver on (cordless) and rinse the shaving head
under hot running water (f). A natural based soap may
also be used provided it contains no particles or abrasive
9
Publicidad
Tabla de contenido
