Hammerhead HCID120 Manual Del Usuario página 12

OPERATInG InsTRUCTIOns
4. lED Worklight
a. The LED worklight, located on
the head of the tool, illuminates
when the variable-speed trigger
is depressed. This provides
additional light on the surface of
the workpiece for operation in
lower-light areas.
b. The LED worklight will turn off
when the variable-speed trigger
is released.
c. This tool is equipped with a
fuel gauge that indicates the
charge remaining in the integrated
Lithium-Ion battery.
If the fuel gauge displays a red light, it indicates that the integrated Lithium-Ion
battery needs to be charged.
5. Dual-function switch
Impact Driving function
Auto Hammer function
set the dual-function switch to
Impact driving function, marked
for tightening or loosening
screws and nuts or drilling.
set the dual-function switch to auto
hammering function, marked with
for hammering nails.
12
4
fUEl
GAUGE
5
IMPACT DRIVInG fUnCTIOn
5
AUTO HAMMER fUnCTIOn
COMPaCT IMPaCT DrIVEr/aUTO HaMMEr
lED