Care And Maintenance; Troubleshooting - Hammerhead HCID120 Manual Del Usuario

OPERATInG InsTRUCTIOns
Recommended nails to Use
The tool is versatile for use with a variety of nails. bright common and finishing nails from
2d to 8d are recommended for use with this tool.
Recommended nailing Materials for the Impact Driver/Auto-hammer
The tool may be used for nailing into all types of woods, wood-like materials, and plaster board.
nOTICE: The tool is not suitable for nailing in hard metal or concrete.

CARE AnD MAInTEnAnCE

all maintenance should only be carried out by an authorized service organization.
Cleaning
before cleaning or performing any maintenance, lock the variable-speed trigger on the
tool by placing the forward/lock/reverse selector in the Off (center) position. for safe and
proper operation, always keep the tool and its ventilation slots clean.
always use only a soft, dry cloth to clean your impact driver/auto-hammer; never use
detergent or alcohol.

TROUblEsHOOTInG

PROblEM
The tool does not work
The tool stops rotation
during operation
bit cannot be installed
Motor overheating
16
POssIblE CAUsE
Integrated Lithium-Ion
battery is depleted
Integrated Lithium-Ion
battery is depleted
Quick-release 1/4" hex
collet is not released
bit does not fit the quick-
release 1/4" hex collet
be sure the cooling vents
are free from dust and
obstacles
CORRECTIVE ACTIOn
Charge the integrated
Lithium-Ion battery
Charge the integrated
Lithium-Ion battery
release the quick-release
1/4" hex collet
Use suitable adaptor
Clean and clear vents. Do
not cover with hand during
operation
COMPaCT IMPaCT DrIVEr/aUTO HaMMEr