Hammerhead HDHD060 Manual Del Usuario página 10

OPERATING INSTRUCTIONS
3. Speed Adjustment Dial
This hammer drill is equipped with a
speed adjustment dial; the required
speed may be adjusted according to
the material and the working condi-
tions.
The speed adjustment dial can be
adjusted even if the drill is running.
Turn the variable-speed adjustment
dial counterclockwise for a higher
speed range; turn the variable-speed
adjustment dial clockwise for a lower
speed range.
4. Direction-Of-Rotation Selector
The direction of bit rotation is revers-
ible and is controlled by a selector
located above the trigger switch. With
the drill held toward you:
a. Position the direction-of-rotation
selector to the right of the tool for
forward rotation.
b. Position the direction-of-rotation
selector to the left of the tool for
reverse rotation.
NOTICE: To prevent gear damage, always
allow the hammer drill to come to a complete stop before changing the direction of rotation.
10
3
SPEED
ADJUSTMENT DIAL
4
REVERSE
DIRECTION-
OF-ROTATION
SELECTOR
FORWARD
6.0 AMP HAMMER DRILL