Supplies Required - Bradley SN2004/IR Manual De Instalación

Installation
Supplies required for installation:
• 3/8" diameter bolts and floor/wall anchors to anchor washfountain pedestal to floor and wall
• 1/2" hot and cold water supply lines and fittings
• 1/2" nom. copper tubing supply lines for types with supplies from above
• Standard P-trap (trap included with "B" or "H" drain type and some optional equipment)
• 1-1/2" drain lines and fittings
• Pipe sealant
Supplies recommended for installation:
• 1-1/2" vent or tie pipe on types vented through washfountain column
• Caulk (may be applied between backsplash and bowl to avoid debris accumulation)
• Electrical cut-off switch to the unit. This feature prevents accidental water delivery during regular maintenance and service.
Dimensions - Sentry
Floor Unit
29" (737)
25" (635)
16-3/8"
10"
(416)
(254)
25-1/4"
(641)
Rough-In Locations for Wall Anchor Bracing
Dimensions are to determine reinforcement locations. Use fixture as a template for precise location of 3/8" anchors.
Juvenile Height dimensions, where
different, are shown in Italics.
Bradley • 215-1071 Rev. J; ECN 12-00-011
Semi-Circular Washfountain
™
42-3/4" (1086)
38-3/4" (984)
40-1/4" (1022)
36-1/4" (920)
33-1/4" (845)
29-1/4" (743)
Floor-Mounted
Units Only
54" Wall Mounted
25"
(635)
29" (737)
25" (635)
10"
(254)
16-3/8"
(416)
35-1/4"
(895)
22-3/8"
(568)
10"
(254)
9"
(229)
24-3/4" (629)
20-3/4" (509)
14-3/4" (203)
10-3/4" (101)
8" (203)
8-3/8" (222)
4-3/4"
(121)
C L
6/29/12
SN2004/IR, SN2024/IR
(mm)
42-3/4" (1086)
38-3/4" (984)
40-1/4" (1022)
36-1/4" (920)
33-1/4" (845)
29-1/4" (743)
32-3/4" (832)
28-3/4" (730)
3