Toro Powervac 51988 Manual Del Operador página 2

Ocultar thumbs Ver también para Powervac 51988:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

READ THIS INFORMATION
STOP
Before you use your new Powervac
get you started.
Fueling
Gasoline and its vapors are highly flammable and
explosive. To prevent serious personal injury and
property damage, handle it with care. Keep away
from ignition sources and open flames, handle
outdoors only, do not smoke and wipe up spills
immediately.
1. Obtain a clean container that is approved for use with gasoline.
2. Mix all of the 2-cycle oil provided with 1 US gallon of 87-octane, unleaded
3. Fill the blower's fuel tank carefully.
Cold Starting vs. Warm Starting
When you restart the blower and you are not sure whether the engine is still warm, set the choke
lever to RUN, lock the throttle wide open, and pull the starter grip and rope. If the engine does not
start within 5 pulls, refer to "To Start a Cold Engine" later in this manual.
Flooded Engine
Will the engine start? If not, it may be flooded. Relax, this is easy to correct. Set the choke lever to
RUN. Squeeze the trigger and pull the starter grip and rope quickly for 10 to 12 pulls.
If the engine does not start, refer to Troubleshooting later in this manual or call toll-free at
866-574-9242 (US) or 866-574-9243 (Canada).
For questions concerning your blower,
call us toll free at 1-866-574-9242 (US) or
1-866-574-9243 (Canada).
2
WARNING:
gasoline (50:1).
, read the following helpful hints to

Publicidad

Tabla de contenido
loading

Tabla de contenido