Festo Compact performance Instrucciones Para El Usuario página 25

3.4 Connecting sensors (PNP inputs)
For connecting sensors use cable type KM8-M8-GSGD-...
and plugs with union nut, M8x1 thread.
Fasten the plugs with the aid of the union nut in order to
prevent unintentional loosening, e.g. due to shock. Seal
the unused sensor connections with the protective caps
supplied. Only in this way can you comply with protection
class IP65.
Please note
The inputs are resistant to short circuits. If a short cir-
cuit occurs, the slave will be switched off. The AS-Inter-
face master regards this slave as missing. When the
short circuit is eliminated, the slave registers immedi-
ately as capable of functioning.
1 Pin assignment:
1: 24 V
3: 0 V
4: Input Ix
2 Inputs of the second
slave
3 Inputs of the first
slave
Festo CPV..-GE-ASI-8E8A-Z 0106a English
0 1 2 3 4 5 6 7
3
3 2
4
1
1
25