Safety Warnings - marklin 150 X Serie Manual De Instrucciones

Ocultar thumbs Ver también para 150 X Serie:
Tabla de contenido

Publicidad

Function
• Possible operating systems:
6646/6647 Märklin Transformer, Märklin Delta,
Märklin Digital, Märklin Systems.
• Recognition of the mode of operation: automatic.
• Addresses that can be set: 01 – 80.
Address set at the factory: 44.
• Mfx technology for the Mobile Station /
Central Station.
• Name set at the factory: S. 150 X 1518
• Adjustable acceleration.
• Adjustable Braking delay.
• Adjustable maximum speed.
• Setting the locomotive parameters electronically with
the Control Unit, Mobile Station or Central Station.
• Built-in sound effects circuit, can only be used in operation
with the Control Unit or Märklin Systems.
• Additional sound effects that can be controlled.
• This locomotive can be retrofitted with a smoke
generator.
The maintenance work necessary with normal opera-
tion of this locomotive is described below. Please see
your authorized Märklin dealer for repairs or spare
parts.
6

Safety Warnings

• This locomotive is to be used only with an operating
system designed for it.
Use only transformers rated for your local ho-
!
sehold power. Do not under any circumstances
use transformers rated for 220 volts or 110 volts
• Pay close attention to the safety warnings in the
instructions for your operating system.
• The feeder track must be equipped to prevent inter-
ference with radio and television reception, when the
locomotive is to be run in conventional operation.
The 74046 interference suppression set is to be used
for this purpose.
No warranty or damage claims shall be accepted in those cases
where parts neither manufactured nor approved by Märklin have
been installed in Märklin products or where Märklin products
have been converted in such a way that the non-Märklin parts
or the conversion were causal to the defects and / or damage
arising. The burden of presenting evidence and the burden of
proof thereof, that the installation of non-Märklin parts or the
conversion in or of Märklin products was not causal to the
defects and / or damage arising, is borne by the person and / or
company responsible for the installation and / or conversion, or
by the customer.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

37887

Tabla de contenido