Operation - Troy-Bilt Horse Manual Del Operario

Tractor hidrostático de césped
Ocultar thumbs Ver también para Horse:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation

Operation
Safety Interlock Switches
This tractor is equipped with a safety interlock system for the
protection of the operator. If the interlock system should ever
malfunction, do not operate the tractor. Contact an authorized
Troybilt service dealer.
The safety interlock system prevents the engine from
cranking or starting unless the parking brake is engaged,
and the PTO (Blade Engage) knob is in the disengaged
(OFF) position.
The engine will automatically shut off if the operator leaves
the seat before engaging the parking brake.
The engine will automatically shut off if the operator leaves
the tractor's seat with the PTO (Blade Engage) knob in the
engaged (ON) position, regardless of whether the parking
brake is engaged.
With the ignition key in the NORMAL MOWING position,
the engine will automatically shut off if the PTO (Blade
Engage) knob is moved into the engaged (ON) position
with the drive pedal in Reverse.
Reverse Caution Mode
WARNING:
Use extreme caution while operating
the tractor in the REVERSE CAUTION MODE. Always
look down and behind before and while backing. Do
not operate the tractor when children or others are
around. Stop the tractor immediately if someone
enters the area.
The REVERSE CAUTION MODE position of the key switch module
allows the tractor to be operated in reverse with the blades (PTO)
engaged.
IMPORTANT:
Mowing in reverse is not recommended.
To use the REVERSE CAUTION MODE:
IMPORTANT:
The operator MUST be seated in the tractor seat.
1.
Start the engine as previously instructed in this Operator's
Manual.
2.
Turn the key from the NORMAL MOWING (Green) position
to the REVERSE CAUTION MODE (Yellow) position of the
key switch module. See Fig. 5-1.
Figure 5-1
3.
Depress the REVERSE PUSH BUTTON (Orange, Triangular
Button) at the top, right corner of the key switch module.
The red indicator light at the top, left corner of the key
switch module will be ON while activated. See Fig. 5-1.
4.
Once activated (indicator light ON), the tractor can be
driven in reverse with the cutting blades (PTO) engaged.
5.
Always look down and behind before and while backing to
make sure no children or pets are around.
6.
After resuming forward motion, return the key to the
NORMAL MOWING position.
IMPORTANT:
The REVERSE CAUTION MODE will remain
activated until:
5
5
15

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

769-0435113ax61kg011

Tabla de contenido