Maintenance Schedule - Troy-Bilt Horse Manual Del Operario

Figure 6-6

Maintenance Schedule

Clean Hood/Dash Louvers
Check Engine Oil Level
Check Air Filter for Dirty, Loose or Damaged Parts
Replace Air Filter Element
Change Engine Oil and Replace Oil Filter
Clean Battery Terminals
Lube Front Axles and Rims
Clean Engine Cooling Fins
Lube Deck Spindles
Lube Pedal Pivot Points
Check Spark Plug Condition & Gap
Replace Fuel Filter
IMPORTANT:
It is important to consult the specific engine Operator's Manual included with this machine for detailed engine
maintenance procedures and intervals.
4.
Parking Brake Adjustment
Hex Nut
If the tractor does not come to a complete stop when the brake
pedal is completely depressed, or if the tractor's rear wheels
Drag Link
can roll with the parking brake applied, the brake is in need of
adjustment. See an authorized Troybilt Service Dealer to have
your brakes properly adjusted.
Seat Adjustment
Ball
Refer to the Assembly & Set-Up section of this manual for seat
Joint
adjustment instructions.
Before Every
Each use 10 Hours
P
P P
P
P
P
The measurement taken in front of the axle should be
between 1/16" and 5/16" less than the measurement taken
behind the axle. Adjust if necessary.
WARNING:
Never attempt to adjust the brakes
while the engine is running. Always disengage PTO,
move shift lever into neutral position, stop engine
and remove key to prevent unintended starting.
Every Every
25 Hours 50 Hours
P
P
P
P
s 6 — M
ectiOn aintenance
Every Prior
100 Hours to Storing
P
P
P
P
P
P
P
P P
P
& a
djustMents
21