Auto Channel Skipping (Auto Skip) Setting; Video Loss Checking (Video Loss); Alarm Buzzer - Panasonic WJ-MS424 Manual Del Usuario

3-1-3. Auto Channel Skipping (AUTO SKIP)
Setting
This parameter lets you set automatic skipping of chan-
nels to which no camera is connected.
1. Move the cursor to AUTO SKIP.
2. Select ON or OFF.
ON: Channels to which no camera is connected are
skipped when SEQ is selected.
OFF: No channels are skipped.
** SYSTEM SETUP **
BORDER
VIDEO OUT
AUTO SKIP
VIDEO LOSS
** SYSTEM SETUP **
BORDER
VIDEO OUT
AUTO SKIP
VIDEO LOSS
1
2
3
4
ON
QUAD
OFF
ON
ON
QUAD
ON
ON
1
3
4

3-1-4. Video Loss Checking (VIDEO LOSS)

This parameter lets you activate a function that checks
whether the video signal is being supplied to the VIDEO
INPUT connector.
1. Move the cursor to VIDEO LOSS.
2. Select ON or OFF.
OFF: The video loss alarm is ignored.
ON: When video loss alarm is received, the picture
switches to the quad format.
"CHXX LOSS" appears on the monitor screen
and the alarm buzzer starts beeping.
** SYSTEM SETUP **
BORDER
VIDEO OUT
AUTO SKIP
VIDEO LOSS

3-2. ALARM BUZZER

This parameter lets you adjust the buzzer time between
1 and 30 seconds and 1 and 5 minutes.
1. Move the cursor to ALARM BUZZER.
2. Select the buzzer time.
OFF: The alarm buzzer does not beep when an
alarm signal is received.
1-30 SEC, 1-5 MIN: The buzzer keeps on beeping
for the duration you set.
EXT: The alarm buzzer keeps on beeping until an
operation is performed from an external equip-
ment such as a time lapse VTR.
SYSTEM SETUP *
ALARM BUZZER
ALARM OUT
ALARM AUTO RESET
SEQ SETUP *
TITLE SETUP *
OFF
-8-
The message
ON
QUAD
OFF
OFF
** MAIN **
2SEC
2SEC
OFF
2SEC ...... 30SEC
1SEC
1MIN ...... 5MIN
EXT