Panasonic WJ-MS424 Manual Del Usuario página 15

SYSTEM 2
The input video signals for this unit are synchronized, and synchronization noise or disturbances in the video output signal
will not occur when the quad or single picture mode is selected.
GENLOCK
VIDEO
Connections
• Connect the VIDEO IN connectors of this unit to the video output connectors of the cameras.
• Connect the VTR OUT connector of this unit to the video input connector of the video distribution amplifier (V.D.A).
• Connect the output of the video distribution amplifier (V.D.A.) to the video input connector of the time lapse VTR and to
the gen-lock input connectors of the cameras.
• Connect the VIDEO OUT connector of this unit to the video input connector of the monitor.
GENLOCK
VIDEO
VIDEO
4 3 2 1
OUT IN OUT IN OUT IN OUT IN
Monitor
GENLOCK
VIDEO
VTR VIDEO ALARM/REMOTE
OUT OUT
VDA
VTR
-13-
GENLOCK
VIDEO
WJ-MS424
SIGNAL GND
Monitor