Daitsu DS-9KIDB Manual Del Usuario página 27

Installation of indoor unit
Step six: install drain hose
1. Connect the drain hose to the outlet pipe of
indoor unit.
2. Bind the joint with tape.
Note:
● Add insulating pipe in the indoor
drain hose in order to prevent
condensation.
● The plastic expansion particles are
not provided.
Step seven: connect wire of indoor unit
1. Open the panel, remove the screw
on the wiring cover and then take
down the cover.
2. Make the power connection wire go
through the cable-cross hole at the back
of indoor unit and then pull it out from
the front side.
3. Remove the wire clip; connect the power connection wire to the wiring terminal
according to the color; tighten the screw and then fix the power connection wire
with wire clip.
drain hose
outlet pipe
tape
18、24K:
2 3
N(1)
blue black brown
Outdoor unit connection
24
outlet
panel
09 、 12K:
2
N(1)
yellow-
blue black brown
green
Outdoor unit connection
drain hose
pipe
drain hose
insulating pipe
screw
wiring cover
3
yellow-
green