Connections - Alpine VPA-B211A Manual De Operación

Connections

Connections
(White/Brown) REMOTE OUT
(White/Brown) REMOTE OUT
(White/Brown) REMOTE IN
(Yellow/Blue) PARKING BRAKE
(Yellow/Black) FOOT BRAKE
AUDIO INTERRUPT
(Pink/Black) IN
(Orange/White) REVERSE
(Black) GND
Fuse (7.5A) BATTERY
(Yellow)
(Red) IGNITION
* If an ALPINE monitor is connected as the external front monitor, connect this lead.
In this case, you do not need to connect the remote control eye.
22
-EN
Cable Color Cable Specifications
Remote Control Output Lead
Connect this lead to the remote control input
lead. This lead outputs the controlling signals
White/Brown
from the remote control.
Remote Control Input Lead*
Connect an ALPINE external front monitor to
White/Brown
the remote control output lead.
Parking Brake Lead
Connect this lead to the power supply side of
Yellow/Blue
the parking brake switch to transmit the
parking brake status signals to the VPA-
B211A.
Foot Brake Lead
Yellow/Black
Connect to the vehicle's foot brake lead or
brake lamp lead.
Audio Interrupt In Lead
Pink/Black
Reverse Lead
Use only when a back-up camera is
connected. Connect to the plus side of the
Orange/White
car's reverse lamp that lights when the
transmission is shifted into reverse (R).
Switches the video picture to the back-up
camera. This is linked with putting the car into
reverse (R).
Ground Lead
Connect this lead to a good chassis ground on
Black
the vehicle. Make sure the connection is made
to bare metal and is securely fastened using
the sheet metal screw provided.
Battery Lead
Connect this lead to the positive (+) post of the
Yellow
vehicle's battery.
Switched Power Lead (Ignition)
Connect this lead to an open terminal on the
Red
vehicle's fuse box or another unused power
source which provides (+)12V only when the
ignition is turned on or in the accessory position.
Remote Control Eye
(Included)
---- To remote input lead
---- To remote output lead
----- Connect this lead to the parking
brake lead powered when
parking brake is engaged.
---- To the foot brake cord or brake
lamp cord.
---- To vehicle phone, etc
---- To plus side of the back lamp
signal lead of the car
---- Connect to a metal part of
chassis body with a screw
Ignition Key