Installing The Condensate Hose - THOMSON THOM HP 8 Manual De Instrucciones

GB
Installing the condensate hose (for direct drainage of condensed water)
To avoid having to empty the condenser water tank every time you use the
tumble dryer, you can use the supplied condensate hose for removing the
water from the condenser directly into the drain.
1.Remove the inner hose
from the hose connector
at the rear of the dryer.
2.Insert one end of the supplied
condensate hose onto the hose
connector.
3.Place and secure the other end
of the condensate hose at a nearby
sink by using the U-fitting.
Be sure to follow all local codes
and regulations in running the
condensate to a suitable drain.
36
200cm