GB
CLEANING AND MAINTENANCE
Turn off the dryer and unplug it from the mains socket before cleaning
and maintenance.
Allow the appliance to cool down before cleaning.
Cleaning the lint filter
The symbol
finished to remind you to clean the filter.
Clean the filter after each cycle to optimise the performance of the dryer.
1.Open the tumble dryer door.
2.Pull the filter out and open it.
3.Clean lint, fibre and cotton ravelling by hand, if necessary clean the filter
under running water and dry it thoroughly.
4.Replace the filter.
-Push the filter all the way down to avoid interference with the door.
Be careful to position the filter correctly, ensuring that the handle
opening faces inwards.
5.Close the door.
IMPORTANT: Do not operate the dryer without the filter in place.
Emptying the condenser water tank
The condenser water tank is located at the top
left corner of the appliance. It collects the water
extracted from your laundry as they are dried.
-If you do not install the condensate hose, empty
the water tank after each drying cycle or during
cycle when the symbol
display.
- Fully remove the water tank. Empty it down a sink and then replace it.
Condensed water is not drinkable!
will appear on the display after a drying cycle is
Filter
appears on the
45