Adding Or Removing Laundry After A Programme Has Started; Changing A Running Programme; Delayed Start; Signal Function - THOMSON THOM HP 8 Manual De Instrucciones

GB

Adding or removing laundry after a programme has started.

1.Press .
2.Open the door.
3.Add or remove items as required.
4.Close the door .
5.Press .

Changing a running programme

Once a programme has started, you cannot change it to another
programme. You will need to cancel the current programme before
you can select a new one.
1.Press to cancel the running programme.
2.Press again.
3.Select another programme and start it by pressing

Delayed start

The drying cycle can be delayed by up to 24 hours. To enable this function,
select the desired programme, press the delayed start button and then
press .
1.Repeatedly press
.
The display will show the delay time.
2.Press to confirm.
.
The symbol
3.Once the delay time has elapsed, the selected programme will start.
To cancel the delayed start
If you want to cancel the delayed start and start the programme, switch
off the dryer and then switch it back on.

Signal function

You can use this function to turn on or off the sound made when pressing
the buttons or turning the programme selection knob.
You can activate this function by pressing
appliance. The signal indicator light
You will hear the buzzer:
-at the end of the cycle;
-when you press any button or turn the programme selection knob.
To deactivate this function, press
will go out.
to increase the delay time by 1 hour, up to 24 hours.
will flash on the display.
43
after turning on the
will illuminate.
again. The signal indicator light
.