Polarized Plug Instructions; Short Cord Instructions - Kalorik AS 27222 Manual Del Usuario

Fax +1 305 430 9692
Never cut food only by using your hands. Always use the slide
and its food guide unless it is impossible because of the size and
dimension of the article. Make sure never to touch the blade.
This kind of appliance cannot function continuously; it is not a
professional type of appliance. It is necessary to make temporary
stops. Check the section « Important information » in the
instruction manual.
The blade of this appliance is extremely sharp; always be very
careful when cleaning the appliance.
It is absolutely necessary to keep this appliance clean at all times
as it comes into direct contact with food.
Make sure the appliance is unplugged when disassembling it
before cleaning or other.
Never touch the blade when the appliance is in use. Furthermore,
never try to stop the movement of the blade in any way
whatsoever.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY

POLARIZED PLUG INSTRUCTIONS

Some appliances are equipped with a polarized plug (one blade is
wider than the other). To reduce the risk of electric shock, this plug
will fit into the polarized outlet only one way. If the plug does not
properly fit into the outlet at first, reverse it. If it still does not fit,
contact a competent qualified electrician. Do not attempt to modify
the plug in any way.
For appliances equipped with a standard plug, simply insert the plug
into the outlet without paying attention to the way you plug it.

SHORT CORD INSTRUCTIONS

A short power supply cord is provided to reduce the hazards resulting
from becoming entangled in, or tripping over a longer cord.
Extension cords may be used if care is exercised in their use.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International USA. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity. Print only what is inside the frame.
3
Assembly page 3/24
AS 27222 – AS 29091 - 120501