Pioneer SE-MS7BT Manual Del Usuario página 16

6. Enjoying music
To use the wireless headphones to listen to music from a Bluetooth device, you
must first perform pairing with the Bluetooth device using the A2DP audio profile.
For details on how to perform pairing, see P.4.
(1) With power to the wireless headphones' turned off, hold the (
depressed for about three seconds.
The headphones' power will turn on and the LED indicator will flash blue.
(2) Turn on the Bluetooth function on the device you wish to connect to.
When pairing is completed, the wireless headphones will automatically connect
to the Bluetooth device.
* If automatic connection is not achieved, or the headphones automatically connect
to a different Bluetooth device than the one you wish to use, follow the instructions
for the desired Bluetooth device regarding manual connection.
Controls when listening to music
If the connected Bluetooth device supports AVRCP, the following operations can be
used.
• ( + ) button
Press once : Advance to next track or chapter.
Press and hold : Increase volume.
• ( – ) button
Press once : Return to beginning of track or chapter.
Press and hold : Decrease volume.
• ( ) button
Press once : Play/Pause.
* When sound volume is set to maximum or minimum levels a beep sound will be
produced from the headphones.
* S ound volume can be adjusted on the matching Bluetooth device.
* D epending on the specifications of the connected Bluetooth device, the controls
noted above and controls on the Bluetooth device may not be supported.
* Depending on the specifications of the connected Bluetooth device, the music
playback settings may need to be configured. Consult the user's manual for the
Bluetooth device.
* Depending on the specifications of the connected Bluetooth device, a music play-
back application may start automatically or the music cannot be paused/played.
Consult the user's manual for the Bluetooth device.
Using the headphones cord
The furnished headphones cord can be used to listen to playback.
) button
Attach straight plug
into unit's body
Note
• Connect the straight plug to the headphones' jack, and connect the L-type plug
to the playback device.
• Insert the plug fully and securely.
Failure to insert the plug sufficiently may result in reduced audio output from the
headphones, or other malfunctions.
• The Bluetooth function cannot be used while the headphone cord is in use.
• If you begin using the headphone cord when power is already turned on, power
to the unit will be automatically disconnected.
6
En
L R
To playback device