Qstarz Beyond Navigation BT-Q1000 Platinum Guía De Instalación Rápida página 4

English
..................................................................................................................................................................
G‐2 Connect BT‐Q1000P with your PC
Please connect BT‐Q1000P with your PC by mini USB cable, and then
BT‐Q1000P and switch it to start logging
G‐3 Start the software utility
NOTE 1: Before starting the software utility, please make sure that the driver
and the software utility has been installed properly. And also, make sure
that BT‐Q1000P already connect with your PC by mini USB cable, power it
on, and switch it to start logging or BT‐Q1000P would enter sleep mode
after few minutes.
NOTE 2: PC Utility V4 only supports BT‐Q1000P. Any intention to use PC Utility V4
connecting GPS units other than BT‐Q1000P would result in software
disconnection automatically.
NOTE 3: Qstarz Travel Recorder PC Utility V4 can't be opened with Qstarz Travel
Recorder PC Utility V3 simultaneously. Please execute either one of both
or the program may experience unstable status.
1. Click from <Start> / <All Programs> / <Qstarz Travel Recorder V4> / Travel
Recorder PC Utility V4
2. <File> \ <Read Log>
Download the log data from Travel Recorder.
2.1 Click <File> \ <Read Log> or the quick link icon.
2.2 Users have to input product key at the first time of use.
key is located on the cover of the driver CD.
2.3 PC Utility will automatically detect the com port and baud rate and load
in the GPS tracks.
2.4 A track list window will be popped up. Select the tracks to import and
tracks will be shown on the Google Map Window.
3. <File> \ <Clear Log>
Clear the data stored in the Travel Recorder.
4. <File> \ <Config GPS>
Configure the recording method of the flash memory of Travel Recorder.
..................................................................................................................................................................
4
.
www.Qstarz.com
power on
The product