Installing And Removing Flat Panel Display - PEERLESS PeerCare SF632-AB Instalación Y Montaje

Installing and Removing Flat Panel Display

Hook display onto wall plate (A) fi gure 4.1. Tighten
4
M5 x 12 mm screws (D), shown in fi gure 4.2 and
detail 1. Tighten screws using 4 mm security allen
wrench (O).
To remove display from mount, loosen screws (D)
and lift display off of mount.
WARNING
• Do not lift more weight than you can handle.
Use additional man power or mechanical lifting
equipment to safely handle placement of the display.
• Failure to lock hook bracket with screws (D) can
cause display to come off mount if hit accidentally.
CAUTION
• Do not tighten screws with excessive force.
Overtightening can cause damage to mount. Tighten
screws to 20 in. • lb (2.26 N.M.) maximum torque.
fi g. 4.2
B
A
D
8 of 29
fi g. 4.1
DISPLAY
B
DETAIL 1
ISSUED: 09-19-11 SHEET #: 203-9041-2 02-08-12
A
A
D